A page in your DokuWiki was added or changed. Here are the details:
Browser : Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/119.0.0.0 Safari/537.36 IP Address : 73.74.143.186 Hostname : c-73-74-143-186.hsd1.il.comcast.net Old Revision : https://hpwiki.mcguirescientificservices.com/4145a_semiconductor_parameter_a... New Revision : https://hpwiki.mcguirescientificservices.com/4145a_semiconductor_parameter_a... Date of New Revision: 2023/12/10 23:24 Edit Summary : User : wschraml
There may be newer changes after this revision. If this happens, a message will be shown on the top of the rev page.
@@ -34,9 +34,9 @@
Below, the steps to use one of the newer "Goteks" (with the latest 435-based MCU and an OLED display) are outlined. They usually come with "FlashFloppy" already installed.
* Remove the existing 5.25 drive. - * Retrofit a 34-pin IDC connector to the 4145A Floppy cable (covered in the YouTube video below). + * Retrofit a 34-pin IDC connector to the 4145A Floppy cable. * Use a power adapter to connect the Gotek to the 4-pin Molex of the 4145A. * Connect Pin 6 and Pin 34 on the floppy drive with a jumper wire. * Format a USB stick for the FAT32 filesystem. * Load the configuration and binary files for the boot disk onto the USB stick. @@ -51,7 +51,14 @@ * Article on putting together the "IMG.CFG" file: http://w6akp.com/projects:hp_4145a_virtual_floppy * FlashFloppy site: https://github.com/keirf/flashfloppy * Jared Cabot's video and helpful information with regards to the 1345A display: https://youtu.be/53asomSXkXQ?si=rld6QaL18WURdmna
+ + ===== HP 4145A - Power Transistor Measurement Setup ===== + + {{:component_measurement:4145a:4145a_-_power_transistor_measurement_setup.pdf|HP 4145A - Power Transistor Measurement Setup}} + + Also published on groups.io: https://groups.io/g/HP-Agilent-Keysight-equipment/message/140475 +